DOWNLOADS
MORTARS
CEMIX MASONRY MORTAR MIX WATERPROOF KHOL is a dark grey mortar with waterproofing properties, used in commercial, industrial and residential applications. It is a mixture of sands, Portland cement and admixtures.
TYPICAL USES:
Used for applications including:
• Brick & Block Work
ADVANTAGES:
• Ready to use - just add water
• Waterproofing properties
COVERAGE:
Approximate coverage per 30kg bag: 30 bricks & 24 blocks
STANDARDS:
Complies with NZS 4210:1989
PREPARATION:
Ensure the bricks and blocks are relatively dry.
MIXING:
1. Empty the bag contents into a wheelbarrow or mixer.
2. Gradually add the prescribed water, mixing thoroughly until a smooth mix is achieved. Do not over mix.
Bag contents to water ratio:
- 30kg: 4.5L to 4.95L.
APPLICATION:
Place a layer of 15mm to 20mm of mix between the layers of bricks or blocks.
Note: The joint gaps are usually 10mm to 15mm. Pointing is easier after the mortar has initially set.
DRYING & CURING TIME:
Drying time depends on the climate. In general, allow for a
minimum of 24 hours at 20°C.
Supplier Item#
Download the Data Sheet for full information: