GP Cement - New Zealand

Description:

Cemix General Purpose Cement is a premium Portland cement used in commercial, industrial and residential construction in New Zealand. It fully complies with the requirements of Type GP Cement in New Zealand standard NZS1322: 2009 - General purpose and blended cement.

Typical Applications & Uses:

Perfect for all kinds of building and construction projects such as;

  • Paving
  • Foundations
  • Brick work mortar
  • Fence post footings
  • Used as a binder in a range of applications; Concrete, Mortars, Renders and Grouts
  • General construction and civil engineering projects

Advantages:

  • Easy to use
  • Versatile
  • Suitable for a variety of construction applications

20kg

Application:

Concrete mixer:

Measure cement, aggregate and water. Place 2/3 of the water in mixer. Add 1/2 of the measured aggregate. Place all the cement in the mixer. Add the remaining aggregate.

Gradually add water to the desired consistency and mix for at least 3 minutes.

Hand mixer:

Measure cement, aggregate and water. Thoroughly mix dry ingredients. Make a hollow then add 2/3 of the water. Mix thoroughly to a uniform colour and consistency. Gradually add water and mix until the desired level of consistency is achieved.

Laying:

Placing: Proper compaction is essential to attain maximum strength. Compact by rodding, tamping or vibration. A timber edge can be used to screed and level the concrete.

Finishing: Delay final finishing until the concrete has begun to stiffen and the surface is free of excess ‘bleed’ water. Avoid over-trowelling as it can lead to surface darkening and colour variations.

Curing: It is recommended that all products containing General Purpose Cement be cured for a minimum period of 7 days. Typical methods such as ponding, curing blankets and curing membranes are recommended. The curing process should begin as soon as the concrete surface can receive the curing method chosen. The practice of curing will enable concrete to react its potential strength. It will reduce the potential for plastic cracking and improve surface durability and overall quality i.e. abrasion resistance, impermeability and a reduction in carbonated rate.

Avoid excess water: Excess water reduces the strength and durability.

Technical Data:

Appearance – Cementitious Grey Powder

Strength (MPa) – 34MPa @ 3 days, 46.7MPa @ 7 days, 63MPa @ 28 days.

Application Temp - 5oC – 30oC

Packaging – 20kg bag

The data shown above reflects typical results based on laboratory testing under controlled conditions. Reasonable variations may occur on site.

Limitations:

The success of any project involving GP Cement is dependent on a variety of factors. Attention must be given to batching, mixing, selection of aggregates & admixtures, placing, finishing, curing and formwork.

Storage:

Cemix® GP Cement has a shelf life of Portland cement products is dependent on the storage conditions. It is necessary for bagged Portland cement to be stored in dry conditions and protected from rain, dew or any other moisture source. Bagged cement that has hardened or is lumpy as a result of exposure to moisture should not be used.

Cleaning:

Clean all tools with water & brush immediately after use.

Help keep New Zealand clean:

Ensure no cement or concrete slurry enters storm water drains or waterways. This slurry has high alkalis levels and is potentially harmful to fish, insects and plants. Any discharge during cleanup should comply with relevant council requirements. Please dispose of this bag responsibly and in accordance with in council requirements.

Precaution:

Hazardous - Portland and blended cement. This product may contain Crystalline Silica. Cements may cause respiratory, skin and eye irritation. Wet cement can be irritating and corrosive to eyes and skin; and may cause skin sensitization (dermatitis). Repeated inhalation may cause bronchitis, silicosis and lung cancer and increase risk of scleroderma.