Cemplaster

Description:

Cemix® Cemplaster can be used for plastering over lath wall, block work, brickwork and tilt slab substrates. Cemix® Cemplaster displays a high level of workability and coverage; it resists sagging, cracking and shrinkage. The results of Cemix® Cemplaster are assured only if it is applied on a key coat of Cemix® Cemsplash.

Typical Application/Uses:

  • Applications where a solid wall plaster in layers up to 12mm are required.
  • Cemix® Cemplaster is especially suited for professional plasterers.

20kg & 30kg

Composition And Materials:

Cemix® Cemplaster consists of a uniformly blended, properly proportioned mixture of sands, Portland cement and other admixtures approved for use in mortar to improve water retention, workability and performance of the product.

Substrate Preparation:

Substrates should be clean & free from all contaminants, loose particles, coatings,
curing compounds, dirt, mould, oil etc. Substrates must be sound, rough & dampened to ensure a good bond.

Mixing:

Please ensure that Cemix® Cemsplash has been applied to the substrate to be plastered. Ensure that the key coat has been given at least 48 hours to cure and harden. The results of Cemix® Cemplaster are assured only if it is applied on a key coat of Cemix® Cemsplash.

Limitations:

  • Cemsplash should be used in conjuction with Cemplaster as a key coat to ensure a good bond.