Cemplus

Description:

Cemix® Cemplus is a very active non-staining liquid which readily mixes with water to improve the workability and adhesion of cement mortar and plaster. This product eliminates the need for hydrated lime, but can be used with lime if required. A great masonry aid for laying bricks, concrete blocks and stone. Absolutely essential for solid plastering.

Typical Application / Uses:

To improve the workability and adhesion of cement mortar and plaster. Eliminates the need for hydrated lime, but can be used with lime if required.

Advantages:

  • Greater plasticity.
  • Increases bond strength.
  • Quicker application.
  • Easier workability.
  • Cleaner work, less droppings.
  • Easier ruling off.
  • Reduces cracks and crazing.
  • Cuts costs – increases productivity.
  • Eliminates need for lime.
  • Reduces water absorption.
  • Resists freeze – thaw damage.
  • Economical – fraction of the price of plasticising paste.
  • Helps prevent efflorescence

1L, 2.5L, 5L, 20L & 210L

Agitation:

Agitate product thoroughly before use.

Application:

For normal soft sand, add up to 80 millilitres of Cemix® Cemplus per 40kg bag of cement. For harsh, sharp or gritty sand up to a maximum of 120 millilitres per 40kg bag of cement may be required. It is important not to use too much Cemix® Cemplus as this will cause over aeration which will weaken the mortar. Mix the sand and cement in the desired amounts. Add Cemix® Cemplus to the mixing water proportionate to the above dosage and add to the mixing bowl. The more the mix is worked the fattier it becomes. Accurate measuring is essential as too much Cemix® Cemplus will affect the mix. Use less rather than more.

Technical Data:

Appearance – White Liquid

Application Temp – 5oC- 30oC

Limitations:

Accurate measuring is essential as too much Cemix® Cemplus will affect the mix. Use less rather than more.

Storage:

Can be stored in its original container with lids tightly sealed in a cool place away from direct sunlight for a period of twelve (12) months after production.

Cleaning:

Clean all tools with water & brush immediately after use.